Your Ad Here
Try Angie's List!

How do I refinish a hardwood floor?

I have hardwood floors under my carpet and I want to tear up the carpet and sand and refinish the floors. I need some help on what equipment I need, where to get it, what to do, etc. Basically every step, start to finish.

VN:F [1.7.5_995]
Rating: 0.0/10 (0 votes cast)
VN:F [1.7.5_995]
Rating: 0 (from 0 votes)
Tagged with:
 

THE FLOOR HAS BEEN STAINED BEFORE BUT, HAD CARPET PUT OVER IT & I PULLED THE CARPET UP, SO I GUESS I MEAN TO RESTORE IT BACK TO ITS ORGINAL SHINE AND LUSTER. THE FLOOR ALSO HAS A 4′X6′ SECTION REPLACED WITH A PLAIN PIECE OF WOOD.

VN:F [1.7.5_995]
Rating: 0.0/10 (0 votes cast)
VN:F [1.7.5_995]
Rating: 0 (from 0 votes)
Tagged with:
 

I just bought a house with beautiful hardwoods floors in the dining room and entry way. I would like to refinish them, but have no idea where to start. I am a DIY kinda person and really don’t want to pay someone else. I also have 2 dogs is there anything I can do to protect the finish once I am done? Please give me step by step instructions in detail if you can! Thanks!

VN:F [1.7.5_995]
Rating: 0.0/10 (0 votes cast)
VN:F [1.7.5_995]
Rating: 0 (from 0 votes)
Tagged with:
 

How to refinish a hardwood floor

We moved into a (potentially) beautiful Harlem brownstone last fall. Unfortunately, the last time the apartment was “renovated”, the contractors were hired on the cheap. We consequently have a very nice hardwood floor that was waxed and sealed while dirty. Which means it has about ten years of dirt between the blanks and and least two weeks of human and cat hair sealed under the wax. Despite our good intentions, unfortunately, neither of us have any experience with stripping, refinishing, or waxing a hardwood floor. So, basically, how do two absolute beginners approach the stripping, cleaning, (possible) refinishing, and sealing/waxing of a hardwood floor?

VN:F [1.7.5_995]
Rating: 0.0/10 (0 votes cast)
VN:F [1.7.5_995]
Rating: 0 (from 0 votes)
Tagged with:
 

I have a wood plank floor that was “finished” at one time — ’bout 65 years ago.. Since then it has been covered with carpet and the finish is pretty much gone. There are no gaps/chips/rot… How can I redo these (with a light finish) on a budget? I think I’d have to sand them lightly —- thats all I know :-)

VN:F [1.7.5_995]
Rating: 0.0/10 (0 votes cast)
VN:F [1.7.5_995]
Rating: 0 (from 0 votes)
Tagged with:
 

We are refinishing 50 year old hardwood floors. The old varnish was just flaking off. How many layers of polyurethane will it take to create a durable finish. Our 70 lb dog will be walking on these. Also does it matter how thick or thin the layers are?

VN:F [1.7.5_995]
Rating: 0.0/10 (0 votes cast)
VN:F [1.7.5_995]
Rating: 0 (from 0 votes)
Tagged with:
 

I have Bruce flooring that has received some minor water damage. The finish has come off, but the wood looks fine. Can we just sand it down with a hand sander and reapply a clear finish? This would just be a quick temporary fix since we are looking at replacing the flooring in the whole room in a few years.

VN:F [1.7.5_995]
Rating: 0.0/10 (0 votes cast)
VN:F [1.7.5_995]
Rating: 0 (from 0 votes)
Tagged with:
 
Your Ad Here

Powered by Yahoo! Answers